DTF Heat Press Instructions
DTF Heat Press Instructions
READY TO PRESS | HOT OR COOL PEEL
For transfers printed by Courting Creations. Both hot and cool peeling are supported. Use a heat press and test settings on your garment when possible.
Recommended Starting Settings
Temperature: 310°F (300–315°F working range)
Time: 10 seconds
Pressure: Medium, even pressure
Peel: Hot or cool
Final press: 5 seconds with parchment paper
How to Apply
- Preheat your heat press. Lay the garment flat and remove lint.
- Pre-press the garment for 3–5 seconds to remove moisture and wrinkles.
- Place the transfer design-side up on the garment. Press for 10 seconds with medium, even pressure.
- Hot peel: Carefully remove the film while warm, or cool peel: let the film cool before removing. Peel smoothly and check that the design has adhered.
- Cover with parchment paper and press again for 5 seconds.
Fabric Notes
These are starting settings for standard cotton and cotton-blend garments. Polyester and heat-sensitive fabrics may need a lower temperature and a test press to avoid scorching or dye migration. Heat presses vary in actual temperature and pressure.
Care Instructions
- Wait at least 24 hours before washing.
- Turn the garment inside out and machine wash cold.
- Avoid bleach and fabric softener.
- Tumble dry low or hang dry.
- Do not iron directly over the design.
Need help? Contact Courting Creations before pressing if you're unsure about your garment.